Trinity RC8 Aluminum Upgrades

Posted on Friday, November 30, 2007 at 10:50 AM by MikeW

Trinity is proud to release a new line of Billet Aluminum Associated RC-8 Hop-Ups

Precision machined aluminum for more strength and super close tolerances.

Hard anodized.

Machined from aircraft grade aluminum.

MADE IN THE USA!

TRI33019, RC8 Center Bulkhead Top Plate 690776095937 $19.99
TRI33020, RC8 Steering Rack 690776095944 $19.99
TRI33021, RC8 Front Shock Tower 690776095951 $32.99
TRI33022, RC8 Rear Shock Tower 690776095968 $32.99

New Losi Lipo Packs

Posted on Thursday, November 29, 2007 at 8:08 AM by chilly

11.1V 3200mAH 3 Cell LiPo 20C for 1/10th Vehicles
LOSB9860 - $99.99


14.8V 2200mAh 4S LiPo 20C battery for Losi Starter Box
LOSB9821 - $87.99


7.4V 1650mAh 2 Cell LiPo 20C for Losi Mini-T/MLST/2
LOSB9830 - $44.99


7.4V 1650mAh 2 Cell LiPo 20C for Losi Slider
LOSB9833 - $49.99


7.4V 5000mAH 2 Cell LiPo 20C for 1/10th Vehicles
LOSB9861 - $109.99


11.1V 1000mAh 3 Cell LiPo 20C
LOSB9832 - $69.99

Integy's New Rock Crawler Shocks

Posted on Tuesday, November 27, 2007 at 5:45 PM by JamesR

Your friends at Team Integy has new alloy aluminum MSR10 Shocks for the Axial AX-10, HPI Wheely King, & other 2.2-sized Rock Crawlers. No more plastic shock excuse - make your truck sweet with these options. The shocks come in your choice of silver, green, purple, or blue. You get four shocks in a set, including all mounting hardware.

Part #'s:
C22763BLUE
C22763GREEN
C22763PURPLE
C22763SILVER

MSRP:
$69.99/set of 4

For more info go to integy.com

New Losi "Grappler" Crawler Body

Posted on Monday, November 26, 2007 at 9:56 AM by JamesR

Losi is proud to announce its latest accessory for the growing class of R/C Rock Crawling with the new "Grappler" 1/10-scale Universal Rock Crawling body. The body features narrowed (“Dovetailed”) front and rear ends to allow for more clearance when your rock crawler is articulating over the toughest of obstacles. The bed of the truck has also been “bobbed” for better departure angles when dropping off of ledges. The Grappler body sits nice and low helping to keep your crawler right side up on the toughest “side hilling” sections. The body features “ghost” marked mounting holes for the Axial AX-10 Scorpion, but it also can be used on most popular 1/10th scale 2.2 Rock Crawler conversions. It's USRCCA legal for all 1/10-scale rock crawling classes, made from crystal clear .040” Polycarbonate, and includes a 5 color decal sheet and precut window masks.

Novak 1/8th-scale Conversion Kit

Posted on Saturday, November 24, 2007 at 8:18 PM by chilly

Official Press Release:

Nitro enthusiasts who want to join the brushless revolution can now convert their 1/8th- scale nitro buggy to electric powered using the Novak 1/8th-scale Conversion Kit. Kits are available for various models of Kyosho™, Mugen™ and Ofna™ vehicles, and include all of the necessary components to convert it to brushless power.

Nitro customers who have never run brushless will now experience longer run times, minimal maintenance, low-end torque and control and incredible top speed.

The Novak Conversion Kit is compatible with the Novak #3020 and #3021 HV High-Voltage Brushless Systems, and is available individually or as a combo kit with these systems. The kit includes a Motor Heat Sink and Motor Mount specifically designed for the Novak 550-size HV motors; Two Battery Boxes for dual 2S Li-Po packs or dual 6-cell Ni-MH packs; and a Steering Servo Mount (replaces dual servo mount set-up as the mechanical brakes and brake servo are no longer needed). Kit includes all the necessary Hardware to complete the conversion.

JConcepts Illuzion Nitro Rustler �Hi-Speed� Body

Posted on Wednesday, November 21, 2007 at 6:27 AM by chilly

Official Press Release:

The "Hi-Speed" style is the latest in design for the Traxxas Rustler truck by JConcepts. The Illuzion “Hi-Speed” styling presents a flowing design while incorporating many radical outlets and coves for additional air flow for engine cooling. Race inspired aggressive styling, Illuzionized cab and cove hood scoop combined with a durable flowing bed design are just some of the features that make the new Illuzion "Hi-Speed" body stand out from the rest.

Add this exciting new body to your Traxxas Nitro Rustler today!

Features:

Original Illuzion "Hi-Speed" Styling
Race inspired body design
Illuzionized cab and cove hood scoop
Clear heavy-duty thickness polycarbonate with protective film
Window masks and detailed Illuzion decal sheet

$22.10

Kyosho wins Pro Series!

Posted on Tuesday, November 20, 2007 at 3:59 PM by MikeW

Cody King has won the popular RC Pro Series National Championship, followed in second place by Ryan Lutz, both running Sirio-powered Kyosho Inferno 777 WC Edition buggies. Even though he trailed in points coming into the Championship final, King led the most laps and won the final round, giving him enough points to capture the National Championship. Ryan Lutz, who TQ'ed both truck and buggy classes with wins in seven of the eight qualifying rounds, scored a third place finish in the buggy class. This gave Lutz enough points to secure the second position for Pro Series Championship, while Kyosho scored the top two spots in the championship with the Inferno 777 WC.

Traxxas Revo is National Champ...again

Posted on Tuesday, November 20, 2007 at 11:26 AM by DerekB

The Traxxas Revo brings home its 4th R/C Pro Series National Championship title. With this 2007 R/C Pro Series win, the Revo remains undefeated in the Monster Truck class in both RC Pro Series and ROAR, winning a total of 6 national championship titles.

The winning Revo was powered by the TRX 3.3 Racing Engine and Traxxas 33% TopFuel The majority of the monster truck racers competing for the R/C Pro Series national points marking the fourth straight national title for the engine and Top Fuel.

Congratulations go out to Tim Roberts for winning both the 2007 R/C Pro Series Monster Truck Finals and the national points championship with his TRX 3.3 Racing Engine powered Revo 3.3. This win marks back-to-back R/C Pro Monster Truck National victories for Tim in addition to his win at the ROAR Truck National Championships earlier this year. Traxxas 33% Top Fuel provided consistent tuning and superior power to Tim?s Revo 3.3 throughout qualifying and the long 45 minute A-Main. Congratulations also go out to; Mark Cordeiro, Trevor Johnson, James Green, Steve Slayden, Phillip Scheel, Jerald Hawthorne, Denny Rhoads, Jake Koetting, Damron Atkins, John Taylor, Mike Battaile, Brian Harjo, and Derek Guidry for placing their Revo 3.3?s into the A-Main.

JConcepts Illuzion RC8 Scoopless Body

Posted on Monday, November 19, 2007 at 11:31 AM by chilly

Official Press Release:

The Illuzion – Scoopless body has turned radical. The Illuzion “Scoopless” styling presents a smooth yet detailed design while incorporating many of the features from the original Scoopless body for the RC10B4. Race inspired aggressive styling, Illuzionized cab and durable design are just some of the features that make the new Illuzion – RC8 body stand out from the rest.

Add this exciting new body to your Associated RC8 today!

Features:

* Original Illuzion - Scoopless Styling
* Race inspired body, cab and window design
* Unique side pod recess for increased durability and detail
* Clear polycarbonate with protective film
* Window masks and detailed Illuzion decal sheet

Part# 0040- $23.80 (Heavy duty add $5)

New Reedy Motors -Stockstar 27T Stock and Challenger 19T Spec

Posted on Friday, November 16, 2007 at 9:37 AM by DerekB

Stockstar 27T Stock and Challenger 19T Spec motors

Reedy is back and better than ever! The all new RM6 based Stockstar 27T Stock and Challenger 19T Spec motors have been designed and conceived in house by our team of dedicated engineers. By incorporating state-of-the-art technology, these all-new creations are poised to become the must-have motors for the hardcore racer.
Dyno and on-track testing reveal all-around performers. A dynamic balance between RPM and torque make both motors the perfect choice for 1/10 scale on and off-road racers and well as the dedicated 1/12 scale racer.
Competition beware, the Stockstar and Challenger are the first in a series of new power products designed to continue Reedy’s winning heritage.

Special Features:

• Six-Sided Diamond Shaped Brushes are exclusive to the Stockstar and Challenger. The unique laydown design and orientation optimizes brush wrap around the commutator and creates a better firing pulse to the armature. Their diamond shape locks them in place inside the brush tube resulting in reduced vibration, increased RPM, and more power.
• Extra Long Brush Tubes housed in an exclusive endbell increase brush support resulting in less vibration, maximum RPM, higher power output, and extended brush and commutator life. Silver plating reduces resistance and allows current flow through multiple paths
• Silver Plated Brush Hoods reduce resistance and ensure easy soldering of ESC wires and brush shunts. Brushes with terminals can be screwed into the specific pre-tapped location
• High Temperature Coil Brush Springs maintain the desired brush/commutator connection even under the most demanding loads. Spring retainers have been color coded for polarity and make brush and spring changes easier than ever
• An Integrated Armature Cooling Fan (Stockstar only) intakes cool air into the motor while expelling hot air. Cooler=faster!
• A Thin Wall Can optimizes the magnetic field to create maximum RPM, higher top speeds, and improved braking feel
• FB9 Wet Magnets resist heat and fade, and have a long lifespan
• Extra Large Can Cooling Vents prevent fade by lowering magnet and armature temperatures
• Extra Large Endbell Cooling Vents allow maximum airflow around the brushes and commutator. Reduced commutator and brush temperatures ensure maximum power output from start to finish
• Surface Mount Capacitors come pre-installed to reduce interference
• Low Friction Bushings or High Speed Ball Bearings allow higher RPM and maximum power output
• Meets ROAR Motor Specifications and is suitable for competition around the world
• An Optimized Armature Stack is wound using pure copper wire and features low profile laminations that create balanced RPM and torque while maintaining linear throttle and braking feel

Pro-Line Crime Fighter LPR

Posted on Thursday, November 15, 2007 at 5:35 PM by chilly

Official Press Release:

The LPR series of tires continues with the release of the Crime Fighter.

The LPR Crime Fighter is the latest generation in tire design for 1:8 trucks. As the class has evolved into pure performance trucks over such a short amount of time, the need for a tire that could meet and exceed those same performance needs was inevitable. Low Profile Race (LPR) means pure performance. Pro-Line stretched the boundaries by offering less sidewall flex, greater response, more forward bite and all at a total weight savings.

When you’re ready for the same technology as National Champions use, then check out the new Crime Fighter LPR for 1:8 trucks.

Features:

· Internal ribbing designed or less tire expansion under acceleration
· Oversized, long-lasting molded foam inserts that conform to the internal ribbing
· National Championship winning technology
· Only 122 grams per tire

Crime Fighter LPR fits LPR Wheels

#1141-01 (M2) - $31.00

Pro-Line Boulder Holder for REVO� 3.3, MGT, Genesis, Warhead

Posted on Thursday, November 15, 2007 at 5:34 PM by chilly

Official Press Release:

Do you haul it, want to haul it, or have ever thought of hauling it? Whatever category you fall into, then check out Pro-Line’s new Boulder Holder body for the REVO® 3.3, MGT, LST, TNX, Genesis, Warhead trucks.

Nothing says fun like the Boulder Holder. Throw it on your truck, throw stuff into the bed and go. Of course, it’s not made for carrying a however many ton load that full scale trucks do but, you do have options to customize the hauling area with rock, dirt, concrete, or anything in-between. It’s been sculpted after many of today’s traditional dump trucks so details and proportions have all been paid close attention to.

When you’re looking to take your monster truck to the next level, then check out Pro-Line’s Boulder Holder body for REVO® 3.3, MGT, LST, TNX, Genesis, Warhead.

Features:

· A deep bed for adding realistic dumping materials
· Realistic design
· Made from genuine GE .060 thick
· Window mask and detail decal sheet included

Boulder Holder fits REVO® 3.3, MGT, Genesis, Warhead

#3261-00 - $33.00

Pro-Line HardDrive for MAXX�, REVO� 2.5, & Savage

Posted on Thursday, November 15, 2007 at 5:31 PM by chilly

Official Press Release:

PROTOform has spent the last 10 years focusing on race bodies for sedan, on-road and oval classes, and during that time they were fortunate enough to be a part of the winning combination in multiple National and World Championships. That same attention to detail and award winning performance can now be found in an ever-expanding off-road bodyline known as the HardDrive.

Design queues consistent with all HardDrives are ventilation louvers found throughout each body. Emulated after full-scale off-road vehicles, each can be cut out allowing for air to flow more effortlessly through the body. This creates less airtime when flying over jumps. Less airtime equals more time on the ground. And, more time on the ground equals reduced lap times and greater consistency lap after lap.

A fresh new design has arrived for the off-road market from an award winning and longtime absentee from the off-road market. Now you can pick right up where PROTOform left off with the new HardDrive body designs.

Features:

· Extreme ventilation found throughout the body
· An off-road first in over 10 years for PROTOform
· PROTOform decal sheet, window masks included, Paint-then-Peel overspray film
· Made from genuine GE .060 thick Lexan-the toughest on the market

HardDrive fits MAXX®, REVO® 2.5, & Savage

#1495-00 - $32.00

Pro-Line Chevy K10 - 1980 for Stampede Nitro/Electric

Posted on Thursday, November 15, 2007 at 5:29 PM by chilly

Official Press Release:

There’s nothing like a full-scale classic truck! It’s rugged design and classic lines scream ingenuity making up its unique characteristics. Maybe that’s why most American’s have such awe for classics, or maybe it’s because of their simplicity. Whatever that case may be, you love them and are reminded of a different time. Pro-Line welcomes you back to a blast from the past with the release of the 1980 Chevy® Pick-up.

Pro-Line’s classic car enthusiasts captured the overall essence of the 1980 Chevy Pick-up and is now available for Nitro/Electric Stampede® and 1:10 Rock Crawler Trucks. Decal sheet is complete with detailed stock and custom grilles, headlights, taillights, and that overall distinct 80's look, all you classic truck enthusiasts will not want to be left behind.

When you’re looking to relive a classic time in automotive history, then check out Pro-Line’s scaled down version of the 1980 Chevy Pick-up.

Features:

· Made from .040 GE Lexan
· A first for the Stampede®/Rock Crawler Market
· Paint-then-Peal over spray film
· 2 styles of grilles to choose from on sticker sheet

Chevy® K10 - 1980 fits Traxxas® Stampede® Nitro/Electric

#3259-00 - $26.00

Pro-Line 4WD Hole Shot Front R3

Posted on Thursday, November 15, 2007 at 5:21 PM by chilly

Official Press Release:

One of the biggest comeback forms of racing in 2007 was electric 4wd. Requests starting pouring into Pro-Line for the ever popular R3 compound in a 4wd front tire. The wait is over.

The Hole Shot has seen numerous National Championship titles as well as World Championship titles. Introduced to the electric scene as the first tire available in Square Lug Technology, it has delivered performance at all levels of racing in just about every category of racing imaginable. Coupled with R3 material, your 4wd is ready for battle on many of today’s blue-groove surfaces. If blue-groove surfaces are not your cup of tea, then check out the super sticky M3 compound specifically designed for more dusty/loamy surfaces.

When you’re looking to holeshot the competition, check out Pro-Line’s Hole Shot 4wd front tire.

Features:

· Made from ultra-soft M3 compound or blue-groove R3 compound
· Multi National and World Championship design
· Fits any 2.2” 4wd front wheel
· Foam inserts included

4WD Hole Shot 2.2” Performance 4WD buggy tire

#8185-02 (M3) - $14.00

#8185-12 (R3) - $14.00

New Trinity Li-PRO Battery Pack

Posted on Wednesday, November 14, 2007 at 11:53 AM by JamesR

Trinity now has available the same Li-PRO battery pack that powers its new NOW brushless truggy available for use in other electric vehicles like the Associated RC-18T. The Lithium Polymer technology of the LI-PRO battery pack makes for a longer running battery at a lighter weight then possible with Ni-Cd or Ni-MH batteries. The LI-PRO battery pack comes with a Tamiya style power connector and a separate charging plug for use with balance chargers like the Trinity TRI22004. The pack is 3 cell 11.1 volts, 1350mAh capacity.

Part Number: TRI38010 Li-PRO 11.1v, 1350mAh Li-Po Battery For 1/18-16th R/C Vehicles
MSRP: $59.99
Available now.

Team Associated RC8RS Rtr

Posted on Wednesday, November 14, 2007 at 9:57 AM by DerekB

The RC8RS "Race Spec" RTR is based on the Factory Team RC8, making for the only 1/8 buggy with the high performance qualities that can live up to Team Associated's toughest standards. The RC8RS is a winner right out of the box and is pure Associated, having been designed for the highest level of performance and off-road fun, with more suspension travel than any other buggy in its class. Designed to take all of the punishment and abuse that a competitive 1/8th scale buggy will face, but to meet those challenges without breaking a sweat, in a convenient ready-to-run package, the RC8RS is yet another, Champion By Design.


The fully assembled and ready to go RC8RS features include:

• Team Associated’s Powerful .28 Pro Engine
• Pro-Start Hand Held Starting System
• Painted and Pre-Mounted Body With Custom Graphic Decal Kit
• S2008 Metal Gear Steering Servo And S1903 Throttle Servo
• Hard-Anodized 3mm Thick 7075 Aluminum Chassis
• Team Associated 2-Chamber Muffler
• Sealed Radio Box With Thread-Through Molded Antenna Mount
• Fuel Bottle
• 3mm Low-Profile Black Anodized Aluminum Shock Towers
• Pre-Mounted Team Associated Tires and Molded Inserts On Dish Wheels
• Hard-Anodized Shock Bodies With Pre-Load Clips, 4mm Shock Shafts, Composite Shock Caps and Rubber Boots
• XP3D Computerized Digital 3-Channel FM Radio System with 10 Model Memory SEE NEXT PAGE!
• 3mm Black Anodized Aluminum Steering Rack With Ball-Bearing Steering System


XP3D 3CH COMPUTERIZED DIGITAL RADIO SYSTEM
Included with the RC8RS RTR!
Designed using state-of-the-art IT technology, Team Associated’s all new XP3D FM Computerized Digital Radio System will advance and simplify the control of your R/C car, boat, or motorcycle while providing many years of enjoyment. The extensive list of standard features and advanced programming functions make the XP3D perfect for use with advanced kits or an excellent choice for RTR radio upgrades.

XP3D Specifications
• Encoder: 3-channel digital
• Frequency Output: 27/75 MHz
• Modulation: AM/FM PPM
• Current Drain: 150mA @ 9.6V
• Power Requirement: 9.6V / 8 AA cells

Standard Receiver Features
• Super-Heterodyne for extra long range
• Interchangeable crystals
• Multi-signal intensified input jamming ratio

Mark Pavidis moves to Kyosho America

Posted on Monday, November 12, 2007 at 12:32 PM by DerekB

Mark Pavidis moves to Kyosho America!

Monday, November 12, 2007 - Kyosho America announces that, as of Monday, November 19th, Mark Pavidis will be joining them as a product designer at their Lake Forest, California facility. Pavidis is a two-time World Champion and the reigning IFMAR World Champion in 1/8 Off-Road, and has 18 years of R&D, product development, and design experience that he brings to Kyosho.

During his tenure as a Kyosho Factory driver, Pavidis has already been instrumental in the design and testing of certain Kyosho vehicles. Kyosho America's Marketing Director Steve Pond says, "Having Mark on staff will give us a distinct advantage because he's raced at the highest level of competition in the world for decades. Not only will he be able to design new products, his considerable racing skill will allow him to test them to the highest limits. Combined with the considerable talents of Gil Losi, Jr., we’re very excited about the possibilities of future products that will result from our newly-formed team."

Traxxas Velineon ESC Cooling Fan

Posted on Friday, November 09, 2007 at 9:01 PM by chilly

Official Press Release:

The Velineon VXL-3s Electronic Speed Control Accessory Cooling Fan reduces temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.

3340 - Cooling Fan, Velineon ESC - $25.00
3355 - VXL-3S Electronic Speed Control (Brushless) (FWD/REV/BRAKE) - $220.00
3350 - Velineon VXL-3s Brushless Power System (Includes VXL-3s ESC, Velineon 3500 Motor, and Speed Control Mounting Plate (#3725)) - $300.00

Losi 1/10 Grappler 2.2 Rock Crawler Body

Posted on Tuesday, November 06, 2007 at 7:26 AM by chilly

Official Press Release:

Features:

USRCCA legal for all 1/10 scale rock crawling classes.
Made from crystal clear 040" Polycarbonate.
Includes a 5 color decal sheet and precut window masks.
Fits the popular rock crawling vehicles: Axial AX-10 Scorpion, Bender SW2 & SW3, Gatekeepers Design GC1 and Reign K2-3L.

LOSA8032 - $23.74

Tekno RC Brushless Conversion for REVO

Posted on Friday, November 02, 2007 at 9:51 AM by JamesR

Seems like this 1/8-scale electric conversion stuff wasn't just a short trend - because Impakt RC introduced their new Tekno RC Brushless Conversion for the Traxxas REVO 2.5 and 3.3. Their brushless conversion kit is direct bolt-on - no additional mods necessary. Everything you need to convert your REVO chassis is included except for the extra electronics that don't normally come with a REVO (motor, ESC and battery). It's also compatible with their Vantage Racing line of chassis. The kit has been designed to work with a 'box stock' REVO. Meaning, you can run reverse, 2 steering servos and any non-nitro-specific hop-ups - such as their new Sway Bar Kit for REVO.

TKR4001
MSRP $150

www.teknorc.com

Battery Expansion Kit for Rustler/Bandit/Stampede

Posted on Thursday, November 01, 2007 at 7:46 PM by chilly

Official Press Release:

The battery expansion kit from Traxxas allows the installation of larger format battery packs into the Velineon powered Rustler VXL, Bandit VXL, and Stampede VXL. The package includes hardware to raise the electronic speed control mount and battery posts by 13mm providing clearance for taller battery packs.

Features:

Easy-to-install kit allows VXL owners to unleash the high-speed potential of the Velineon Brushless Power System
Raises the electronic speed control mount and battery posts by 13mm for additional battery pack clearance
Front battery posts include two mounting locations for standard and raised heights
Clean factory look that compliments the Velineon powered VXL models

3725X - Battery Expansion Kit for Rustler, Bandit, & Stampede (Stampede requires two-piece receiver and battery hold down kit #3627X) - $6.00

3627X - Two-piece receiver and battery hold down for Stampede & Stampede VXL - $5.00

Traxxas Precision Aluminum Steering Bellcranks

Posted on Thursday, November 01, 2007 at 7:45 PM by chilly

Official Press Release:

Enhance steering precision, strength, and looks with Genuine Traxxas™ machined aluminum steering bellcrank assemblies. Engineered exclusively for Rustler and Bandit, the ball bearing equipped bellcranks offer silky smooth operation for reduced friction and long life.

The pre-assembled units are easy to install, include detailed installation instructions, and are available in fire-red or a brilliant-blue anodized finish with laser-etched Traxxas logo.

Features:

Pre-assembled bellcranks are easy to install
Ball bearings provide smooth, precise steering
Brilliant-blue or fire red-anodized finish
Dresses up Rustler and Bandit while adding strength and durability
6061-T6 aluminum
Includes installation instructions and hardware

3743X - Red-Anodized Aluminum Steering Bellcranks for Rustler & Bandit/ 5x8mm ball bearings (4) hardware (assembled) - $34.00

3743A - Blue-Anodized Aluminum Steering Bellcranks for Rustler & Bandit/ 5x8mm ball bearings (4) hardware (assembled) - $34.00

Exo-Carbon Parts for Jato

Posted on Thursday, November 01, 2007 at 7:39 PM by chilly

Official Press Release:

Traxxas® Exo-Carbon™ components add a glossy, high-tech carbon-fiber look to Jato®. The innovative Exo-Carbon finish forms a tough skin over standard Jato composite parts resulting in the quality and strength you expect along with the appearance of high-gloss carbon fiber. Exo-Carbon resists fuel and abrasion for long-lasting good looks.

Features:

Easy-to-install kit transforms Jato with a unique high-tech finish
The smooth, glossy finish resists fuel and abrasion for long-lasting good looks
Carbon high-gloss finish adds another dimension of customization.

5522G - Exo-Carbon Kit for Jato (includes rear & mid-chassis battery covers, receiver cover, dirt guards, suspension arms, front bumper, & fuel tank cap) - $75.00

5515G - Battery Box Cover, bumper (rear), Exo-Carbon finish (Jato) - $8.00

5523G - Battery cover (mid chassis), Exo-Carbon finish (Jato) - $6.00

5524G - Receiver cover (chassis top plate), Exo-Carbon finish (Jato) - $5.00

5527G - Dirt Guards, left & right, Exo-Carbon finish (Jato) - $18.00

5531G - Suspension arms, front (left & right), Exo-Carbon finish (Jato) - $17.00

5533G - Suspension arms, rear (left & right), Exo-Carbon finish (Jato) - $17.00

5535G - Bumper (front), Exo-Carbon finish (Jato) - $9.00

5547G - Fuel tank cap, Exo-Carbon finish (Jato) - $5.00

E-Maxx Single Motor Gear Cover & Motor Plate

Posted on Thursday, November 01, 2007 at 7:38 PM by chilly

Official Press Release:

The new E-Maxx® (#3905) was designed from the ground-up to handle extreme brushless torque and power. Traxxas makes it easy to convert from dual motors to a single brushless motor setup. Choose your favorite electric power plant and bolt it in using the Traxxas single motor gear cover and blue-anodized aluminum motor plate. The two-piece gear cover keeps dirt and debris out, while allowing easy access to the pinion and spur gear. A removable plug makes slipper clutch adjustments easy. These parts give your brushless install a clean factory fit and finish. Fits E-Maxx model 3905.

Features:

Makes it easy to convert from two motors to a single brushless motor configuration
Strong 3.2mm thick blue-anodized motor plate
Two-piece single motor gear cover allows easy pinion and spur gear access
Removable plug allows easy slipper clutch adjustment
Single motor is positioned along the centerline of the chassis for superb weight distribution.

3977X - Gear Cover for Single Motor Installation (upper & lower) (1)/ dust plug (1)/ 3x6mm CS (3) (Use with motor plate #3997X) - $4.50

3997X - Motor Plate for Single Motor Installation (Use gear cover #3977X) - $10.00

Traxxas E-Maxx Lightweight Aluminum Turnbuckles

Posted on Thursday, November 01, 2007 at 7:35 PM by chilly

Official Press Release:

Lightweight Aluminum Turnbuckles 30% lighter than steel, more than double the strength of titanium! Traxxas® now offers patent-pending Tubes™ aluminum bellcrank drag link and turnbuckle toe links for the new E-Maxx® (#3905). Traxxas Tubes are 30% lighter than the stock steel turnbuckles, plus they’re 4-times stiffer and more than double the strength of aftermarket titanium! These are the strongest adjustable links you can buy for E-Maxx. The unique patent-pending hollow tube design maximizes stiffness and resistance to bending, while at the same time reducing weight. Traxxas Tubes are manufactured from high-grade 7075-T6 aluminum and anodized brilliant fire red. To prevent marring the finish, a metric aluminum wrench is included for adjustment. The broad center nut makes it easy to line up the wrench for fast, trackside tuning. A handy machined groove on one end easily identifies the left hand threads.

Features:

Patent Pending tubular design
30% Lighter than steel
4X stiffer and more than double the strength of titanium
Red-anodized 7075-T6 aluminum
Includes non-marring aluminum adjustment wrench
The strongest turnbuckles available for E-Maxx (3905)
Genuine Traxxas™ quality fit and finish

5141R - Tubes™ Toe Links, Maxx (7075-T6 aluminum, red) (112mm, front) (2) (For Maxx® models w/ sealed pivot ball suspension & 3.8” wheels) - $25.00

5143R - Tubes™ Toe Links, Maxx (7075-T6 aluminum, red) (124mm, rear) (2) (For Maxx® models w/ sealed pivot ball suspension & 3.8” wheels) - $25.00

3941R - Tubes™ Steering Drag Link (7075-T6 aluminum, red) (72mm) (1)rod ends (2)/ aluminum 7mm wrench (Fits E-Maxx model #3905) - $12.00

Revo Performance Sway Bar Kit

Posted on Thursday, November 01, 2007 at 7:33 PM by chilly

Official Press Release:

The Traxxas® Revo® sway bar kit is a must have for Revo racers everywhere. The kit was created, developed, and extensively field tested by Traxxas driver and reigning national champion Tim Roberts. The unique patent-pending design was built around the original engineering software models to compliment the advanced Revo progressive suspension geometry. The exact placement and perfect fitment allow maximum adjustability and tuning, while eliminating the chance of interference or clearance problems. The lateral sway bar resistance works with the suspension components to maximize traction and handling.

The sway bar kit fits Revo and Revo 3.3, and it includes front and rear linkages, mounts, thick and thin sway bars, hardware, comprehensive installation instructions, and tuning guide.

Features:

Fully adjustable design
Heavy-duty components
Improves track handling and corner speed
Compatible with stock rear exhaust
Front/rear thick and thin sway bars are included
Pre-assembled front and rear linkages
Includes installation instructions and tuning guide
Complete and easy to install
Perfect Traxxas fit

5498 - Sway Bar Kit for Revo & Revo 3.3 - $30.00

Replacement Parts:

5495 - Sway Bar Linkage, Front (Revo) (3x70mm turnbuckle) (2) (assembled with rod ends, hollow balls and ball studs) - $12.00
5496 - Sway Bar mounts (front & rear) (Revo)/ swaybar wires (front & rear) (4)/ drill guide/ spacers - $10.00
5497 - Sway Bar Linkage, Rear (Revo) (3x30mm turnbuckle) (2)/ (assembled with rod ends, hollow balls and ball studs) - $12.00

Revo Wing Mount and Wing

Posted on Thursday, November 01, 2007 at 7:32 PM by chilly

Official Press Release:

The Traxxas® Revo® wing and wing mount are the latest additions to the performance accessory line-up for the five-time National Champion Revo 3.3. The combination of the adjustable deflection angle, wing height, and the unique wing design allow tuning options for any track condition and driving style. Run a rear wing on Revo for increased highspeed stability and cornering traction, added engine and chassis protection, an extremely controllable and level flight path while jumping, and a useful way to carry your truck. The heavy-duty wing attaches to a reinforced, adjustable mount.

The wing mount kit includes the mount, hardware, and installation instructions. The wing is available separately in white, black, or the new Exo-Carbon finish.

Features:

Durable, unique wing design
Adjustable wing height and deflection angle
Low-profile factory fit and appearance
Stout frame design incorporates bumper mount
Heavy-duty, adjustable wing brace
Interlocking design is easy to install
Compatible with aftermarket wings
Includes hardware and instructions

5411 - Revo wing mount (includes hardware, wing mount, wing brace, and instructions) - $10.00
5412 - Revo wing (white, includes decal sheet) - $14.00
5446 - Revo wing (black, includes decal sheet) - $14.00
5446G - Revo Exo-Carbon wing (Exo-Carbon finish, includes decal sheet) - $20.00
5413 - Center wing mount cross-brace (includes wing washers) - $5.00

Losi HD Vented Brake Disk Set for 8ight & 8ight-T

Posted on Thursday, November 01, 2007 at 7:31 PM by chilly

Official Press Release:

Features:

Machined from special high-thermal mass material allowing very high temperatures for extended periods of time without failure
Consistent braking even after long run times
Brake disc life increased by 250% over stock set
Vent slots eliminate caliper float caused by material gassing, slots also cool the braking components

LOSA3542 - $14.99