Articles in " Nitro "
-
LRP’s New ROAR National Champion ZZ.21c!
A new era in nitro engine technology has begun. The LRP ZZ.21C Ceramic is efficient and powerful, with immediate response, maximum torque over the whole RPM range, and a smooth operation that you normally find only in much larger engines, making the new LRP engine a must-have for every serious racer. The exclusively [...]
-
Losi Goes 1/5 Scale!
Bigger. Faster. Stronger. The Losi® 1/5-scale 5IVE-T 4WD Off-Road Racing Truck is the closest thing to a full size vehicle in realism, performance and experience. It features a 4WD drivetrain, Spektrum™ telemetry receiver,1/4-scale servos, large bore shocks, a durable protective roll cage, 4-piece body and much more. The 5IVE-T is the only 4WD 1/5-scale vehicle [...]
-
RPM Shock Shields: ON
RPM’s new Shock Shaft Guards for Associated 1/10-scale shocks are a simple design, replacing your stock shock spring cup with one that has a thin but tough shield rising up to the base of the shock body, completely blocking debris from striking the shock shaft. The back and sides are open, which prevents debris from [...]
-
A Trio of Savox’ New High-Voltage Servos
Savox has a trio of new high-voltage servos for any ride you have. First up is their SB-2270SG Monster Torque brushless steel gear digital servo, featuring 444 oz.-in. of torque and a 0.12 60-degree speed at 7.4v. Second, their new SA-2271SG Ultra Torque brushless steel gear digital servo. The SA-2271SG features 277 oz.-in. of torque [...]
-
Pro-Line’s Blockade Coming to Short Course
Here’s a sneak peak from Pro-Line Racing – after the success of the Blockade tires at the 2011 ROAR Gas Nationals, these SC-sized tires have been spotted at the Pro-Line test track. Expect a long lasting tread pattern with exceptional forward and side bite on a variety of surfaces, latest generation V2 SC wide carcass [...]
-
RPM Rod Ends for Traxxas 1/10 Vehicles
RPM has expanded their Rod End lineup to cover Traxxas 1/10th scale vehicles. Built tough, the area around the ball stud is thicker than the stock rod end while still allowing a full range of motion of the pivot ball. Additionally, the shank has been redesigned with a pair of flats, making the rod end [...]
-
Losi’s Convenient 8-in-1 Hex Wrench Kit
Losi’s new 8-in-1 tool set includes an anodized storage handle with seven different hex sizes (.050 in, 1/16 in, 1.5 mm, 5/64 in / 2.0 mm, 3/32 in, 3/32 in Ball End and 2.5 mm). Tips lock in place unlike other tools using magnets that may slip. Now you can travel light and not have [...]
